al
pos_to_rotate_sensor
prs
Trendsetter_400/800_Auto
When set, (1), this flag enables the unload traveller rotate position sensor.
This sensor is used to verify that the unload table traveller is in the correct
(i.e. safe) location to rotate the plate. When cleared, (0), the sensor is
by-passed and timeouts are used instead.
byte
1
0 to 1
If this flag is cleared, (0), machine operation is significantly slowed down and
some critical safety checks are not done. Clearing this flag should only be done
on a temporary basis and the sensor should be repaired as soon as possible.
Please do not clear this flag unless absolutely necessary!
cal